Midea MKT3-200FG30 4-pipe Ducted Fan Coil

Midea MKT3-200FG30 is a concealed 4-pipe ducted fan coil designed for 30 Pa external static pressure above a suspended ceiling or inside a service area. At high, medium and low fan speeds it delivers 340/255/170 m³/h airflow, 2.00/1.76/1.52 kW cooling capacity and 3.00/2.64/2.22 kW heating capacity. Air can be supplied through a plenum and a short duct network to one or more diffusers. This size class can be considered for small and medium rooms, hotel rooms, private offices and zones with a limited number of air outlets when supported by the project load calculation.

Separate chilled-water and hot-water circuits provide greater flexibility for zone heating and cooling control. The unit measures 741×241×522 mm, has a net weight of 15.1 kg and produces 41/37/31 dB(A) across its three fan stages. The chilled-water circuit uses G3/4 connections and the hot-water circuit uses G1/2 connections. This product is not a self-contained refrigerant ducted air conditioner; it requires connection to a chiller or another correctly designed chilled- and hot-water source.

Selection must account for the calculated room load, duct pressure loss, filter and diffuser resistance, entering-water temperature and acoustic criteria. The casing should be suspended level, the condensate pipe should maintain a continuous fall, and chilled-water and drain lines require insulation. Service access must remain available for the filter, fan motor, valve set and electrical box. Other sizes can be compared in the ducted fan coil units category.