Floor-Standing Fan Coil Midea MKH2-150-R4

Floor-Standing Fan Coil Midea MKH2-150-R4 is a hydronic room terminal designed for low-level installation with bottom air intake and upward discharge. It operates on a two-pipe water circuit, using the same four-row heat exchanger for seasonal cooling or heating. At high, medium and low fan speeds, airflow is 255/192/139 m³/h, equivalent to 150/113/82 CFM. Total cooling capacity across those speeds is 2.25/1.85/1.40 kW, while heating capacity is 2.35/1.87/1.42 kW.

Power input is 40/24/15 W and sound pressure is 42/35/27 dB(A) across the three operating speeds. The cabinet measures 790×495×200 mm and has a net weight of 16.7 kg, supporting installation along a wall or within a suitable architectural recess. The system design must allow for a G3/4 water connection, an OD18.5 mm condensate drain and a 220–240 V, 50 Hz electrical supply. The unit may be applied in residential, hotel, office and commercial areas when matched to the calculated room load, water temperatures, hydraulic balance, thermostat control and maintenance clearances. It is not a self-contained refrigerant split air conditioner and must be connected to a chiller, heat pump or another suitable hot- and chilled-water source.