Formül MEB Drainage elbow 100 mm 45°

Specifications

• Brand: Formül
• Product type: Drainage elbow
• Nominal size: 100 mm
• Product code: MEB
• Angle: 45°
• Joint: Push-fit socket with sealing ring
• Application: Gravity wastewater and indoor drainage lines

The Formül drainage elbow 100 mm is a system component for gravity wastewater and indoor drainage installations.

Its sealing-ring socket permits sequential assembly with compatible pipes and fittings; the ring must remain clean and correctly seated.

Before assembly, cut the pipe end square, remove burrs and control the insertion depth.

Diameter, gradient and changes of direction must follow the drainage design, and the fitting should not be installed under mechanical stress.

Use a compatible assembly lubricant and avoid mineral oils or materials that may damage the sealing ring.

Protect penetrations through walls and floors, and position supports so normal movement caused by temperature variation is not blocked.

When ordering, confirm size 100 mm, angle 45° and code MEB together.