Formül Drainage elbow 75 mm 87°
Formül Drainage elbow 75 mm 87°
Specifications
- Brand: Formül
- Product type: Drainage elbow
- Nominal size: 75 mm
- Product code: FR-00AF-DRS-075087-P
- Angle: 87°
- Joint: Push-fit socket with sealing ring
- Application: Gravity wastewater and indoor drainage lines
The Formül drainage elbow 75 mm is a system component for gravity wastewater and indoor drainage installations.
Its sealing-ring socket permits sequential assembly with compatible pipes and fittings; the ring must remain clean and correctly seated.
Before assembly, cut the pipe end square, remove burrs and control the insertion depth.
Diameter, gradient and changes of direction must follow the drainage design, and the fitting should not be installed under mechanical stress.
Use a compatible assembly lubricant and avoid mineral oils or materials that may damage the sealing ring.
Protect penetrations through walls and floors, and position supports so normal movement caused by temperature variation is not blocked.
When ordering, confirm size 75 mm, angle 87° and code FR-00AF-DRS-075087-P together.
